Ultrasonic Thickness Gauges

Brief

This state of the art, digital Ultrasonic Thickness Tester UT200 is a menu-driven, fully functional unit offering everything from the basic measurement to extended memory (4000 readings storage) and RS 232 output capabilities. This dynamic gauge is designed to measure the thickness of metallic and non-metallic materials such as steel, aluminum, titanium, plastics, ceramics, glass and any other good ultrasonic wave conductor as long as it has parallel top and bottom surfaces.
The UT200 is a quite versatile model which can be easily equipped with any of the low & high frequency probes as well as a high temperature probe.

Technical Data:

Display type: 4-digit LCD
Display resolution: 0.0004 inches or 0.01mm
Measurement range: 0.04-8.0 inches in steel w/standard probe
Memory capacity: 4000 readings
Sound velocity range: 3280-32805 ft/s (1000-9999 m/s)
Operating temperature: 32°F-122°F (0°C-50°C)
Out put: RS232
Power supply: 1,5v AA alkaline batteries (2pc)
Battery life: Approx. 250 hours
Dimensions: 4-1/4 x 2-3/8 x 1 inch
Weight: 4.7 oz

Standard package: UT200 unit, standard 5MHz probe PT-08, built-in calibration block, two AAA batteries, operation manual and carrying case.

This combination of the UMX Underwater Enclosure and the MX-3 Digital Ultrasonic Thickness Tester provides a versatile system for performing underwater corrosion surveys. The MX-3 has a high-speed scan mode and is designed to measure the thickness of a variety of materials with a resolution of 0.01 mm. The UMX enclosure is constructed with clear plexiglas and stainless steel fittings and is rated for operation at a depth of 300 feet.

The MMX-6 is a versatile ultrasonic thickness tester that combines features like fast scan, alarm and data logging together with multi-mode operation. No need to remove or allow for errors due to paint and coatings. Conveniently toggle between pulse-echo mode (detect flaws & pits) and echo-echo mode (eliminate paint & coating thickness). The MMX-6 uses a highly-damped dual-element transducer for both modes thereby eliminating the need to switch between transducer types

The PX-7 Precision Thickness Gauge has a measuring range from 0.0060 to 1.0000 inch, (0.15 to 25.40 mm). Using a single element delay tip transducer, the gauge will measure very thin materials in the Echo-to-Echo Mode and automatically switch to Interface ­Echo Mode when measuring thicker materials and plastics. In the Echo-to-Echo Mode you have the ability to measure the thickness of materials without removing the paint or the coating.
THE PX -7 utilizes state-of -the-art digital tech­nology to produce fast and accurate read­ings. It is packaged in an all-aluminum sealed case making it resistant to the working environment. The gauge is simple to operate and features: Alarm Mode, Differential Mode, Internal Data-Logging and an RS-232 data output port to interface with a computer or other data acquisition system.

The MVX is equipped with multiple-viewing options: RF Waveform, +/- Rectified Waveform, Time-based B-Scan and Large Digits. The A-Scan rectified mode is commonly used for detecting flaws/pits in pulse-echo mode and measuring thru-paint and coatings in the echo-echo mode. The B-Scan displays a cross section of the test material and is commonly used to display the profile of the bottom surface. The MVX is equipped with an alpha-numeric data logger, high-speed scan feature (32 measurements per sec.) and the ability to store up to 64 custom user-defined setups.